|
|
SD/SDC
series are of high performance,self-exciting double-use generators
specially designed for generating welding seperately ,or for welding and
moderately lighting simultaneously.This generator is suited for direct
coupling or belt driving with a medium speed petrol or diesel engines,or
AC or DC motor.The output voltage of generator is 230V AC,and that of the
welding is no greater than 80 volts,its frequency is either of 50Hz or
60Hz.Other rated voltage can also be designed according to the order.When
the double-use set is used for generator with a 5% speed regulation of the
prime mover, under a load variation from 0→100% and
100%→0, cosΦ1.0, the steady-state voltage regulation rate is no
greater than ±5%.As load being suddenly changed,the double-use generator
can be rapidly adopted and oprated steadly.When it is used for welding,it
has a good characteristic performance for welding current to produce a
stealy electric arc thus ensured the quality of welding.SD series
generator is of drip-proof ,axial ventilation type.The construction of its
frame with front and rear end cover is of casting iron.On the end cover of
the drive end,there installed a set of tapped spigot holes, which can be
fitted with a prime mover conveniently.At the same time ,there are two
screen mesh plate on the outlets of the drive and and the inlets of the
nodrive and to provide ample protection to the machine .After removing
this screen mash plate at the non drive end ,the brushers and sliprings
are easy to access.
Operating
Conditions：
Ambient
Temperature：-15℃~+40℃
Altitude：Not
Exceed
1000m
Relative
Humidity：Not
Exceed
90%
|
|
|
